- Posts: 18
- Thank you received: 0
Cubo 18 box or..? Update: MBP-46!
- Backii
- Topic Author
- Offline
- New Member
joeysub wrote: Read my last post as I edited it , yes its a big problem mate ! It means its not tune which will result in no bass and a broken driver!
Put the port in and try againg , then see if it beats the Yorkville? smiley15
Aight Gonna edit the box this week
Regards Backii
Please Log in or Create an account to join the conversation.
- joeysub
- Offline
- Premium Member
- Posts: 143
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- maliy470
- Offline
- New Member
- Posts: 2
- Thank you received: 0
Good afternoon, at once beg pardon for my English I from Ukraine! I have 4 loud speakers of MAG M1801 and M1802 whether they will Walk up for CUBO 18 or advise other more suitable variant! Beforehand enormous thank you.
Technical descriptions of MAG M1801
Specifications
Nominal diameter 460 mm
Impedance 8 Ohm
Power handling AES 1000 W
Frequency range 30-500 Hz
Sensitivity (1W/1m) 97 dB
Voice coil:
diameter 99 mm
winding material copper
former material fiberglass
winding height
23 mm
Magnet system:
magnetic gap depth 12 mm
magnet diameter 220 mm
flux density 1,1 T
Thiele-Small parameters
Fs 32,3 Hz
Vas 221,5 l
Qts 0,3
Qes 0,31
Qms 9,8
Re 6,0 Ohm
Bl 30,7 Tm
Sd 1195 cm²
Mms 229,5 g
Xmax 8,5 mm
L 3,1 mH
h 2,38 %
Dimensions
Outer diameter 471 mm
Baffle cutout diameter 414 mm
Mounting 8x M6 holes on Ø440
Height 212 mm
Weight 14 kg
Technical descriptions of MAG M1802
SPECIFICATIONS
Nominal diameter mm 460
Impedance Ohm 8
Nominal power handling W 1000
Frequency range Hz 30-500
Sensitivity (1W / 1m) dB 96
Voice coil:
diameter mm 99
winding material copper
former material glass fibre
winding height
mm 25
Magnet system:
magnetic gap depth mm 12
magnet diameter mm 220
flux density T 1,0
THIELE-SMALL PARAMETERS
Fs Hz 35,1
Vas L 170
Qts 0,41
Qes 0,43
Qms 10,3
Re Ohm 6,1
Bl Tm 28,2
Sd cm² 1195
Mms g 254,7
Xmax mm 9,5
L mH 3,2
h % 2,0
DIMENSIONS
Outer diameter mm 471
Baffle cutout diameter mm 414
Mounting holes 8xØ6,5 on Ø440
Height mm 206
Weight kg 12,9
Please Log in or Create an account to join the conversation.
- Cubo15
- Offline
- Platinum Member
- Posts: 916
- Thank you received: 131
Best regards
Cubo
Please Log in or Create an account to join the conversation.
- t.geessounds
- Offline
- Elite Member
- Posts: 172
- Thank you received: 4
Please Log in or Create an account to join the conversation.
- Cubo15
- Offline
- Platinum Member
- Posts: 916
- Thank you received: 131
Best regards
Cubo
Please Log in or Create an account to join the conversation.
- t.geessounds
- Offline
- Elite Member
- Posts: 172
- Thank you received: 4
ok the cubo sub is the cubo sub/cubo21 right??Cubo15 wrote: Cubo Sub if you're after the deepest, smoothest bass. Cubo 18 Extended if you're after the highest output from ~40 Hz and up..
Best regards
Cubo
Please Log in or Create an account to join the conversation.
- Cubo15
- Offline
- Platinum Member
- Posts: 916
- Thank you received: 131
Best regards
Cubo
Please Log in or Create an account to join the conversation.
- gavaets
- Offline
- New Member
- Posts: 3
- Thank you received: 0
What is the frequency range for Cubo sub?
thank you.
Cubo15 wrote: That's right.
Best regards
Cubo
Please Log in or Create an account to join the conversation.
- Cubo15
- Offline
- Platinum Member
- Posts: 916
- Thank you received: 131
Best regards
Cubo
Please Log in or Create an account to join the conversation.