Scoop Alternatives - EM Quake/Martin WSX V18/Modded CV AB36

More
12 years 6 months ago #17059 by bitzo
if you port that cab, that space will be not wasted.

Please Log in or Create an account to join the conversation.

  • levyte357
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
12 years 6 months ago #17060 by levyte357

bitzo wrote: if you port that cab, that space will be not wasted.


To begin with, would prefer simple non ported 7ft horn version, relying on driver, chamber, horn length
to get low end extension, and comparing to Quake/WSX.

Porting could possibly be an idea for 2nd revision ?

WSX has small amount of wasted area, so I'm guessing it's not such an issue if minimal.

\"When in Vegas, do as the vegasians do\".

Please Log in or Create an account to join the conversation.

More
12 years 6 months ago #17067 by bitzo
the C horn layout cause wasted space because there's not "free" panels. I mean if you chanbe the rear volume you'll change the horn shape and go on.
The Z layout like wsx, is more tunable. Amano make a different version of wsx using the C layout.

Please Log in or Create an account to join the conversation.

More
12 years 6 months ago #17078 by Tony Wilkes
Why no mention of Tapped Horns? In many ways they are a perfect alternative to scoops i.e. similar gain, will work on their own and relatively compact.

Please Log in or Create an account to join the conversation.

  • levyte357
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
12 years 6 months ago - 12 years 6 months ago #17080 by levyte357

Tony Wilkes wrote: Why no mention of Tapped Horns? In many ways they are a perfect alternative to scoops i.e. similar gain, will work on their own and relatively compact.


To be honest, because I'm a cheap skate. :lol:

Started with simple design, hoping for few simple mods, as I fully intend to get at least one built, and know exactly type of money
builders time & 8x4s of ply/mdf cost. smiley22

Also, cab is really intended for purposes where throw and uniform response 45hz-140hz are primary concerns, e.g carnival & outside.

1220H & 636W are my primary dimensions, ideal top cab would be MT122.

\"When in Vegas, do as the vegasians do\".
Last edit: 12 years 6 months ago by levyte357.

Please Log in or Create an account to join the conversation.

More
12 years 6 months ago #17083 by Tony Wilkes
Fair enough, you should get the chance to hear a few in a couple of months time at The Palace, more info as it becomes clearer :)

Tony

Please Log in or Create an account to join the conversation.

More
12 years 6 months ago #17101 by luton_soundman

Tony Wilkes wrote: Fair enough, you should get the chance to hear a few in a couple of months time at The Palace, more info as it becomes clearer :)

Tony


ebony showcases boxes? or somebody else?

Please Log in or Create an account to join the conversation.

More
12 years 6 months ago #17117 by Tony Wilkes

luton_soundman wrote:

Tony Wilkes wrote: Fair enough, you should get the chance to hear a few in a couple of months time at The Palace, more info as it becomes clearer :)

Tony


ebony showcases boxes? or somebody else?


Yes mate, 4 built I believe, heard 2 together so 4 should be good fun. New upper boxes in progress as well but will leave it to Edward to spill the beans.

Please Log in or Create an account to join the conversation.

More
12 years 3 months ago #18763 by jsg
Mighty dub pass?

Ars est celare artem

Please Log in or Create an account to join the conversation.

More
12 years 3 months ago - 12 years 3 months ago #18772 by mykey-
yeah closest would be a TH. None of the FLH mentioned WILL ever be a scoop alternative.

You will hear the K1 soon,closest FLH you will ever hear to a scoop, but once you hear it you won't want a scoop again.
Last edit: 12 years 3 months ago by mykey-.

Please Log in or Create an account to join the conversation.

Time to create page: 0.340 seconds
Powered by Kunena Forum